Beautalent® Treasure Metal Detector WWW.BCCZY.COM
DDD03 Ultrasonic Long
Range Treasure Locator


    Product Size: 46×38×18 CM
    Packing Size: 50×39×26 CM
    Gross Weight: 9KG
  • Introduction: DDD03 Metal Detector System:
    The DDD03 Ultrasonic Long Range Treasure Locator is an advanced Metal Detector System utilizing advanced FORWARD GAUSS technology that is both an audio and visual detector.
    This metal detector was first used in the field in 1984 and the FORWARD GAUSS technology that it uses has proven to be (by far) the most successful.
    This system was originally developed for professional archeologists and treasure hunters and has been used both on land and under water. With the development of faster and more complex processing units and a reduction in the cost of materials, we were able to begin offering this breakthrough technology to the general public at a much more affordable cost. Part of the success of this metal detector system is that it does not look like a standard 'metal detector' . Instead, it has the appearance of a fine, well manufactured piece of scientific equipment that one might expect to find at an archeological site.
    The DDD03 Ultrasonic Long Range Treasure Locator is 'custom built' in a sturdy, hard side, padded case with two locks. The transmitter is case mounted and includes the 'Standard Six' elements with selector switch. The system includes an installed, rechargeable gel cell battery with charger, transmitting antenna, receiving rods and receiver with belt clip, headphones and user manual all inserted into the specially fitted case.

  • Features and Functions:
    1. Most common frequencies are Bronze, Brass, Silver, Sand Gold, Rock Gold, and Jewel.
    2. Detecting Range: 320~3200 Foot
    3. Detecting Depth: 16~ 160 Foot
    4. After tracking target, you will have some idea of the identification and the exact pinpoint.
    5. The face (front) of the transmitter has six LED's (channel indicator lights) across the top; each is labeled for a particular element.
    6. The face of the transmitter has 10 LEDs (100m, 200m, 300m, 400m, 500m, 600m, 700m, 800m, 900m, 1000m) showing 10 different detecting range. And has one knob for selecting the detecing Range Also, the face of the transmitter has 10 LEDs (5m, 10m, 15m, 20m, 25m, 30m, 35m, 40m, 45m, 50m) showing 10 different detecting depth. And has one knob for selecting the detecing depth.
    7. Add one mini set with the receiver. This mini set is a kind of sensitivity increaser. It could make the model to be more sensitiver.
  • Components:
    1. A black case with aluminum trim, a handle and two locks
    2. External Battery Port
    3. The Belt Receiver
    4. Sensitivity Increaser
    5. Head Phones
    6. Receiving Rods
    7. Battery Charger, AC/DC adapter
    8. Antenna
    9. Marker Flags
    10. Operators Manual
  • Specifications:
    1. Max Detection: 16~160 Foot
    2. Detect Range: 320-3200 Foot
    3. Rechargeable Battery: Continuous working 48 hours
    4. Power: 850mA
    5. Frequency: 433Mhz+/-150Khz
    6. Inner Storage: EEPROM 16k*8Bit
    7. Voltage: 9~12VDC
    8. Temperature Range: -40°C~85°C
    9. Operating Humidity: 0~95% (non-condensing)
    10. Ultrasonic Frequency: 400-3000Mhz+/-150Khz
    11. Weight: 14LBS
Direction of Operation

Fig 1

Fig 2
After finishing all the field test of this system, placing transmitter on the ground. Plug the antenna into output jacks. This antenna can cover 360° detecting range. The most sensitive detecting area is as the dotted lines shown in Fig 1.

PROPOSAL:
Between the antenna and your target, there is a signal line (it is a suppositional, virtual line). You should carry the receiver rods and attach the receiver unit and walk around the antenna to find one point of the signal line. As you approach the signal line between the antenna and your target, you will begin to hear a frequency in the headset.

When you are on the signal line, the sound will be the loudest, and the rods should cross when the line between the test target and the transmitter is crossed. Please note, every point on the signal line should be marked.

According to above way, walk "S" for seeking the point of signal line. And make some marks. See Fig 2.

When the rods are not crossed, you have deviated your target.
When you pass the target, the rods will turn and point the target.
About Contact
© BCCZY.COM ®